Later when in Windows 8/7/Vista you can add a loader entry for Windows XP, Vista or Windows 7/8 installed on disk (if entry not already present in BCD) using Visual BCD Why use echo before installing new software? i was struggling a lot to restore the grub,and this site came handy for me . I'm seeing the boot manager sitting inside the one large NTFS partition on my hard disk drive. http://ksresource.net/dual-boot/a-fresh-win7-install-over-a-win7-vista-dual-boot-system.html
Download and install the latest version of EasyBCD. use "sudo fdisk -l" to find ubuntu partition "sdx,y" And change this command to"grub-install -root-directory=/mnt /dev/sdx,y" Sharath said, in December 4th, 2009 at 7:25 am Hi, I changed the command to Confirm. This is due to Windows using a very simplistic boot-loader. http://www.sevenforums.com/installation-setup/11978-lost-dual-boot-vista-after-windows-7-install.html
[email protected]:~$ sudo -i [email protected]:~# mount /dev/sda7 /mnt mount: special device /dev/sda7 does not exist [email protected]:~# mount /dev/sda6 /mnt /dev/sda6 looks like swapspace - not mounted mount: you must specify the filesystem I still have all of the Windows 7 files on my hard drive, but Windows 7 has no way to boot. Again,thank's TOm said, in August 16th, 2011 at 10:51 pm Works like a charm,thank you RAHUL MR said, in August 18th, 2011 at 9:06 am This should be the best result I had three partitions: 1 for Windows 7, 1 for Ubuntu, and 1 for Ubuntu swap.
I tried the Grub4Dos (cos my live CD didnt worked) and Voilá! I then ran sudo update-grub, and the output showed Found Windows 7 (loader) on /dev/sda1. grub2 bootloader is back!!! Dual Boot Repair Xp Some computers also let you press F8 to pick where you want to boot from – you may use that option instead.
It did not detect Windows 7 and only had Ubuntu on the Grub menu. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. Is there a way to fix this any other way? –AndroidMechanic Aug 22 '16 at 21:52 add a comment| up vote 3 down vote Run fdisk -l on terminal to check https://www.boyans.net/DualBootRepair.html Convert a boxed integer to an nullable integer with potentially different type How are water vapors not visible?
The system will restart and you finally have a option to select Windows 10/8/7. Windows 10 Boot Repair Tool On the Win7 box I had to "sudo update-grub" and delete “grldr” “grldr.mbr” “boot.ini” & “menu.lst”. on my next reboot, grub2 bootloader was gone and my pc was only booting to xp on without any other options in between. I hope you may help me , thanks William Ward said, in January 9th, 2011 at 11:04 pm Thank you!
If you don't remove them, trying to boot into Windows will just throw you back into GRUB. http://askubuntu.com/questions/435160/cant-boot-windows-7-after-installing-ubuntu Write down on a piece of paper the required commands for fixing both boot and mbr. Dual Boot Repair Windows 10 Linked 0 I install Ubuntu 15.04 using Something else option in a new Partition of HDD. What Dynamic Link Library Handles Low-level Hardware Details? Howto Recover Grub2 After Windows Installation said, in December 10th, 2010 at 5:38 am [...] How to restore Grub 2 after reinstalling Windows XP/Vista/Win7 (Ubuntu Sharing) If you enjoyed this article,
This can be solved easy when in Windows 8/7/Vista by using Visual BCD Editor for renaming the loader entry. http://ksresource.net/dual-boot/dual-boot-win-vista-32-bit-to-64bit-win-7.html GRUB to install easily and repair reinstall my grub. Unfortunately this doesn't work on opensuse, so [...] elias.alberto said, in January 25th, 2011 at 7:36 pm Many thanks, man! That's it ! Fix Dual Boot Windows 7
What to do if I am sick and can't drive myself home? Now you might want to have Windows 7 permanently as a menu item in the GRUB Boatloader menu. Either that or you can modify boot.ini. check over here All the partitions are there so I have two operating systems but grub is no longer accessible.
It would also be sensible to check in your BIOS to make sure that the hard drive with grub on it is the highest up the list of the hard drives What Command Can Be Used To Scan For Windows Installations Not Stored In The Bcd? The file containing Windows 7/8 Recovery environment is "WinRe.wim" and usually resides in the system folder "\Windows\System32\Recovery" before installation. I look for this web page every 6-12 months and I'll be so bummed if it ever disappears.
I am running Vista and Jaunty. EDIT [...] DavisEngy said, in February 10th, 2010 at 3:37 pm Used both the XP and Win7 methods on separate installs of Ubuntu 9.10. Modifying BOOT.INI won't help-- the NTLDR boot loader, which uses BOOT.INI, can't boot Windows Vista or newer OS's. –Evan Anderson Jun 26 '09 at 0:12 Grub has chainloader +1 Dual Boot Not Working Windows 10 Ubuntu Sharing UbuntuCommunityAsk!DeveloperDesignDiscourseHardwareInsightsJujuShopMore ›AppsHelpForumLaunchpadMAASCanonical current community chat Ask Ubuntu Ask Ubuntu Meta your communities Sign up or log in to customize your list.
Reinstall GRUB2 after installing Windows « The Jungle Online said, in February 23rd, 2010 at 8:43 pm [...] the rest here -34.393528 [...] Phil said, in March 5th, 2010 at 8:01 If you found it, then type update-grub Then reboot And you will able be able to choose your selected OS If permission is denied on running fdisk -l alone, add administrator If I start in recovery mode it boots fine. this content The Windows 7/8 loader element "Auto Recovery Enabled" is also present and set to true.
Saved a lot of time and suffering. That's all ;) share|improve this answer answered Aug 3 '15 at 19:47 snayob 2,7751715 add a comment| Your Answer draft saved draft discarded Sign up or log in Sign up GRUB reinstall said, in January 20th, 2011 at 5:09 am [...] had gone through similar problem. You would think it would be part and parcel with the 9.10 installation.
The rescue cd is nice because it has a xfce gui to work with. The XP boot loader (the one that uses BOOT.INI-- NTLDR) can't boot Windows Vista or newer Windows OS's. –Evan Anderson Jun 26 '09 at 0:17 add a comment| up vote 0 I don't remember exactly how I got around it when it first happened to me, but just check that your partition with GRUB in it is bootable. Benn My System Specs OS Vista & Windows 7 RC .
panoet said, in March 25th, 2011 at 11:30 am For anyone who said this method doesn't work, I have try this way and worked well Levan said, in April 10th, 2011 It doesnt sem to know that vista is there. windows windows-xp windows-7 multi-boot share|improve this question asked Jun 26 '09 at 0:08 Jader Dias 6,54140110169 migrated from serverfault.com Jul 3 '11 at 16:32 This question came from our site for